Huawei SmartAX MA5603T Configuration Manual page 964

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Templ
ate
Type
VDSL2
alarm
template
Data Plan
Table 11-21
Issue 01 (2014-04-30)
Function
A VDSL2 channel profile provides the
following parameters: data channel
mode, minimum impulse noise
protection, interleaved delay
parameters, rate parameters,
retransmission at the physical layer,
erasure decoding, and G.998.4
retransmission.
A VDSL2 alarm template consists of a
VDSL2 line alarm profile and a VDSL2
channel alarm profile. Values to be
configured in a VDSL2 alarm template
are thresholds within any 15 minutes.
When the statistics of an item reach the
threshold, the system informs the
device of the event, and sends alarms to
the NMS.
A VDSL2 line alarm profile provides
the following parameters for COs and
CPEs:
l Forward error check seconds
(FECS)
l Errored seconds (ES)
l Severely errored seconds (SES)
l Loss of signal seconds (LOSS)
l Unavailable seconds (UAS)
l Low error-free throughput rate
(LEFTR) defect seconds
A VDSL2 channel alarm profile
provides the following parameters for
COs and CPEs:
l Coding violations counts (CVC)
l Corrected blocks counts (CBC)
provides key information about the Internet access service (VDSL2 access).
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 FTTB and FTTC Solution Configuration
Configuration
l To query: display vdsl channel-
template
l To add: vdsl channel-template
add or vdsl channel-profile
quickadd
The system has one default VDSL2
alarm template (template 1).
l To query: display vdsl alarm-
template
l To add: vdsl alarm-template add
or vdsl alarm-template quickadd
l To query: display vdsl alarm-
profile
l To add: vdsl alarm-profile add or
vdsl alarm-profile quickadd
l To query: display vdsl channel-
alarm-profile
l To add: vdsl channel-alarm-
profile add or vdsl channel-alarm-
profile quickadd
939