Huawei SmartAX MA5603T Configuration Manual page 492

Access module
Hide thumbs Also See for SmartAX MA5603T:
Table of Contents

Advertisement

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
huawei(config-if-power4875l-0)#power module-num 2 1 2
huawei(config-if-power4875l-0)#quit
Step 6 Configure GIU subtending.
MA5600T/MA5603T/MA5608T-1 is subtended with MA5600T/MA5603T/MA5608T-2,
MA5600T/MA5603T/MA5608T-3 and MA5600T/MA5603T/MA5608T-4. Therefore, the
subtending should be configured.
huawei(config)#vlan 60 to 62 standard
huawei(config)#port vlan 60 to 62 0/19 0-1
huawei(config)#vlan 101 to 102 standard
huawei(config)#port vlan 101 to 102 0/19 0-1
huawei(config)#vlan 100 standard
huawei(config)#port vlan 100 0/19 0-1
Step 7 Enable MSTP.
1.
2.
3.
4.
Step 8 Configure the ADSL2+ service.
The MA5600T/MA5603T/MA5608T supports the ADSL2+ service of multiple encapsulation
modes, such as IPoA, PPPoA, IPoE, and PPPoE. This topic uses the PPPoE mode as an example
to describe how to configure the ADSL2+ service. For other encapsulation modes, see
Example: Configuring the xDSL Internet Access
1.
Issue 01 (2014-04-30)
Enable the MSTP function.
huawei(config)#stp enable
Change global stp state may active region configuration,it may take
several
minutes,are you sure to change global stp state? [Y/N][N]
Y
Set the MST region name.
huawei(config)#stp region-configuration
huawei(stp-region-configuration)#region-name hwrg
Configure MSTP instance 1.
huawei(stp-region-configuration)#instance 1 vlan 1 to 4094
Activate the configuration of the MST region.
huawei(stp-region-configuration)#active region-configuration
STP actives region configuration, it may take several minutes,are you sure
to
active region configuration? [Y/N][N]y
huawei(stp-region-configuration)#quit
Configure the ADSL2+ line profile.
You can configure the ADSL2+ line profile based on your requirements.
huawei(config)#adsl line-profile add 10
Start adding
profile
Press 'Q' to quit the current configuration and new configuration will
be
neglected
>
Do you want to name the profile (y/n)
[n]:
>
Transmission
mode:
>
0:
Custom
>
1: All (G.
992.1~5,T1.413,ETSI)
>
2: Full rate(G.
992.1/3/5,T1.413,ETSI)
>
3: G.DMT (G.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Configuration Example of MSTP Subtending Network
Service."
"3.1
467

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartax ma5600tSmartax ma5608t

Table of Contents