Scenario And Hardware Configuration (Gpon) - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Concept
IPTV Headend

11.1.2 Scenario and Hardware Configuration (GPON)

The typical GPON FTTB and FTTC networking scenarios and their OLT and ONU hardware
configurations are listed in the table below.
Scenario
FTTB
Networki
ng (LAN
Access
Without
HGW)
FTTB/
FTTC
Networki
ng (xDSL
Access
Without
HGW)
Issue 01 (2014-04-30)
Introduction
The IPTV headend system functions as the contents preparation
platform in the IPTV system. It provides functions such as signal receipt,
media format conversion, and media material management.
Description
l The ONU is deployed in
the building and is
connected to the user's
home through the
category-5 cable.
l The ONU provides FE
and POTS ports for the
Internet access and VoIP
services.
l The ONU is deployed in
the building or street fiber
distribution terminal and
is connected to the user's
home through the twisted
pair cable.
l The ONU provides xDSL
and POTS ports for the
Internet access and VoIP
services.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 FTTB and FTTC Solution Configuration
OLT Typical
Configuration
(Main Control Board
+
Service Board
+Upstream Board)
SCUN/SCUH+GPBD
+GICF/GICG/X2CA
MDU
Configuration
ONUs applicable to
this scenario:
MA5616, MA5822,
MA5612
ONUs applicable to
this scenario:
MA5616,
MA5622A,
MA5603T
818