Adding An Ont To An Olt - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Item
OLT

9.7.1.3 Adding an ONT to an OLT

Services can be configured for an ONT only after the ONT is successfully added to an OLT.
Data Plan
Table 9-2 Data plan
Item
DBA profile
ONT line profile
ONT service
profile
Network
topology data
Procedure
Step 1 Configure GPON ONT profiles.
GPON ONT profiles include the DBA profile, line profile, service profile, and alarm profile.
l DBA profile: A DBA profile describes GPON traffic parameters. A T-CONT is bound to a
DBA profile for dynamic bandwidth allocation, improving upstream bandwidth utilization.
Issue 01 (2014-04-30)
Step
9.7.1.12 Verifying Services
Data
Profile name: ftth_dba
Profile type: type3
Assured bandwidth: 8 Mbit/s
Maximum bandwidth: 20 Mbit/s
Profile name: ftth
T-CONT ID: 4
GEM port ID for management services: 11
GEM port ID for voice services: 12
GEM port ID for video services: 13
GEM port ID for Internet access services: 14
Profile name: ftth
ONT port capability set: adaptive
PON port: 0/1/0
ONT IDs: 1 and 2
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 FTTH Configuration
Description
The OLT provides remote verification
methods including ONT PPPoE/DHCP
dialup emulation and call emulation for
configuration and commissioning engineers
to verify services remotely after service
configuration, avoiding a second on-site
operation.
582