Verifying Services - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
----End

11.4.2.12 Verifying Services

This topic describes how to verify services such as Internet access and IPTV services.
Issue 01 (2014-04-30)
Parameter
Bearing
service
Enabling
status
VPI/VCI
VLAN mode
VLAN ID
802.1p
Mode
DHCP
NAT
c. Click OK.
d. Choose Appliciation > Broadband Phone Configuration from the navigation
tree. Configure the parameters as follows:
Parameter
Address
Port ID
Enabling
User number
User
password
3. Restart the HGW.
Choose Management > Device Management and click Restarting the Device.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 FTTB and FTTC Solution Configuration
Value
VoIP
Implement
Set the VPI/VCI to the same as that configured on the devices
at the central office. In this example, set this parameter to
0/35.
VLAN Transparent Transmission
VLAN ID corresponding to the user VLAN value for voice
service flows created on the ONU. In this example, set this
parameter to 200.
Enabled
Route mode
Enabled
Enabled
Value
Preferred IP address of the proxy server: 200.200.200.200
Preferred signaling port ID of the proxy server: 5060
Enabled
When logging in to a VoIP account, you can set the user
account to the user telephone number. In this example, set
the user telephone number to 83110001.
-
1069