Huawei SmartAX MA5603T Configuration Manual page 978

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
This operation interrupts the ongoing services carried on the currently used MG interface. Hence,
exercise caution when performing this operation.
Data plan
For details about the data plan, see
Item
MG
interface
data
NOTE
The data
configurati
on must be
the same as
the data
configurati
on on the
MGC.
Voice user
configuratio
n data
Common
parameter
Issue 01 (2014-04-30)
CAUTION
Media Media and signaling
and upstream VLANs
signalin
Media and signaling
g
upstream port
paramet
ers
Media IP address and
signaling IP address
Default gateway IP address 10.10.10.1/24
MG interface ID
Signaling port ID
IP address of the primary MGC
Port ID of the primary MGC
Coding
Transmission mode
H248 version that MG starts to
negotiate
Phone number
Terminal identification
User priority
User type
System parameter
Overseas parameter
PSTN port attribute
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 FTTB and FTTC Solution Configuration
11.2.5 Principle of VoIP Service Data
Data
200
0/0/1
10.10.10.10/24
0
2944
200.200.200.200/24
2944
Text
UDP
1 (the negotiation starts from V1)
83110001-83110024
Terminal layering is not supported
and the terminal identification
ranges from 0 to 23.
Cat2 for phone 1
Cat3 for phone 2 to phone 24
(default)
Common user (DEL user by default)
Default value
Default value
Polarity-reversal
Plan.
953