Huawei SmartAX MA5603T Configuration Manual page 743

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Configuration Item
IPTV service data
QoS (priority)
VoIP service data
Prerequisite
l
l
l
Procedure
l
Issue 01 (2014-04-30)
Data Item
VoIP service
Multicast protocol
Multicast version
Configuration mode of the
multicast program
IP address of the multicast
server
Multicast DHCP server group
Multicast program
HSI service
IPTV service
VoIP service
VoIP DHCP server group
The OLT is connected to the upper-layer devices such as the BRAS, multicast server,
SoftX3000, and DHCP server.
The VLAN of the LAN switch port connected to the OLT is the same as the upstream
VLAN of the OLT.
The OLT uses the OPFA board or the OPGD board to connect to the ONT.
Configure the Internet access service on the OLT.
1. Create a VLAN and add an upstream port to the VLAN.
The VLAN ID is 100, and the VLAN is a smart VLAN. The upstream port is
0/19/0.
huawei(config)#vlan 100 smart
huawei(config)#port vlan 100 0/19 0
2. Configure a traffic profile.
Because the VoIP, IPTV, and Internet access services are provided through the same
port, you must set the 802.1p priority of each service. Generally, the priorities are in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 FTTH Configuration
Data
SVLAN: 200
CVLAN: 3
IGMP proxy
IGMP V3
Static configuration mode
10.10.10.10
20.2.2.2
20.2.2.3
BTV-1: 224.1.1.10
BTV-2: 224.1.1.20
Priority: 1; queue scheduling:
WRR
Priority: 4; queue scheduling:
WRR
Priority: 5; queue scheduling:
PQ
20.1.1.2
20.1.1.3
718