Huawei SmartAX MA5603T Configuration Manual page 443

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
2.
3.
4.
5.
6.
Step 7 Create an Ethernet access service port.
Create a VLAN for the ETH emulation service (after ETH emulation, this VLAN will be restored
by the peer ETH PWE3 gateway), and then create a service port for translating the CVLAN ID
into the VLAN ID of the emulation service.
huawei(config)#vlan 3001
huawei(config)#service-port vlan 3001 eth 0/4/0 multi-service user-vlan 20 rx-cttr
6 tx-cttr 6
Step 8 Bind the VLAN to the PW to create the ETH PWE3 service.
Bind emulation SVLAN 3001 to PW 10, and set PW type to static PW, out label of the PW to
8500, and in label of the PW to 8600.
huawei(config)#pw-ac-binding vlan 3001 pw 10 static transmit-label 8500 receive-
label 8600
Step 9 Query the PW status.
huawei(config)#display pw-ac-binding vlan 3001
Total : 1
----------------------------------------------------------------------------
VLAN
ID
----------------------------------------------------------------------------
3001
----------------------------------------------------------------------------
----End
Result
The private network data of the enterprise can be transparently transmitted over the MPLS
network, and all services in the private network can be provided normally.
Configuration File
vlan 200 smart
port vlan 200 0/19 0
interface loopback 0
ip address 5.5.5.5 32
quit
mpls lsr-id 5.5.5.5
mpls
mpls te
Issue 01 (2014-04-30)
Configure the LSR ID of the peer PWE3 gateway in the PW. Configure the LSR ID of the
PWE3 gateway to 6.6.6.6.
huawei(config-pw-para-10)#peer-address 6.6.6.6
Configure the PW type to ethernet tagged.
huawei(config-pw-para-10)#pw-type ethernet tagged
Configure the PW to support the control word.
huawei(config-pw-para-10)#control-word
Enable the virtual circuit connectivity verification (VCCV) function.
huawei(config-pw-para-10)#vccv cc cw alert ttl cv lsp-ping
Configure the tunnel policy used by the PW.
Configure the tunnel policy name to ethpw-plcy.
huawei(config-pw-para-10)#tnl-policy etnpw-plcy
huawei(config-pw-para-10)#quit
(Up/Down :
PW
ID
10
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Configuration Example of the Private Line Service
1/0 Static/LDP :
PW PROTO RECEIVE TRNS
STATE TYPE LABEL
up static 8600
1/0)
PW
LABEL INDEX
8500 10
418