Stand-Alone Commissioning; Checking The Settings Of Dip Switches; Checking The Settings Of Dip Switches On The H801Esc Board - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
NOTE

1.3 Stand-Alone Commissioning

After the hardware installation, a stand-alone MA5600T/MA5603T/MA5608T should be
commissioned to ensure that the stand-alone MA5600T/MA5603T/MA5608T works in the
normal state. The following recommended commissioning tasks and sequences are for reference
only. Different offices have different conditions; therefore, it is recommended that customers,
with the assistance of Huawei engineers, modify commissioning tasks according to actual
requirements.

1.3.1 Checking the Settings of DIP Switches

This topic describes how to check the settings of the DIP switches on the environment monitoring
board (ESC board) and the fan monitoring board. This ensures the consistency between the
settings of DIP switches and the application of DIP switches.

1.3.1.1 Checking the Settings of DIP Switches on the H801ESC Board

This topic describes how to check the settings of DIP switches on the H801ESC board. Checking
the settings of DIP switches helps ensure that the settings meets actual requirements.
Prerequisites
The device must be powered off.
Description of DIP Switches
The H801ESCA board resides in the I-type PDU and provides two DIP switches, namely, S5
and S6.
Figure 1-2 Layout of the DIP switches (in default settings) on the H801ESCA board
Table 1-5
Issue 01 (2014-04-30)
l A commissioning script can be made based on the actual networking and the data plan. For how to
make a script, see 1.6.1 Script
l For details about the default settings of the main software on the MA5600T/MA5603T/MA5608T, see
1.6.3 Software Package
Figure 1-2 shows the layout of the DIP switches on the H801ESCA board.
describes the usage of DIP switches S5 and S6.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Making.
Settings.
1 Commissioning
7