Huawei SmartAX MA5603T Configuration Manual page 362

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Item
IUA link
parameter
ISDN BRA port
Procedure
Step 1 Configure the working mode of the ISDN BRA port.
In the BRA port mode, configure the working mode of the ISDN BRA port to P2MP, configure
the activation mode to stable activation, and enable automatic activation.
huawei(config)#braport
huawei(config-braport)#braport attribute set 0/3/1 workmode p2mp autodeactive
enable
Step 2 Add an IUA link set and IUA links.
In the SIGTRAN mode, configure the SIGTRAN protocol stack. Add an IUA link set, and then
add IUA links.
huawei(config-braport)#quit
huawei(config)#sigtran
huawei(config-sigtran)#iua-linkset add 1 mgid 0 jointly-work enable trafficmode
override
Issue 01 (2014-04-30)
Service
environment
corresponding to
the IUA link set
IUA link ID
Local port ID
Local IP address
Remote port ID
IP address of the
primary MGC
MGC that is bound
to the IUA link
Priority of the IUA
link.
IP address of the
primary MGC
Subrack ID/Slot
ID/Port ID
IUA interface ID
Working mode
TID
Phone number
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuring the DSLAM Services
Data
client
15
1401
10.13.4.116/16 (It must exist in the signaling IP
address pool.)
1400
10.14.1.2/16 (IP address of the primary MGC)
primary-mgc
3
10.14.1.2/16 (IP address of the primary MGC)
0/3/1
10
P2MP
106
88880000
337