Huawei SmartAX MA5603T Configuration Manual page 179

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Issue 01 (2014-04-30)
Figure 1-64 Add device
– When the SNMP V2 is used, In the dialog box that is displayed, set the
required parameters, as shown in the following figure.
IP Address is 10.50.1.10, Device Name is huawei, and SNMP
Parameters is SNMP V2:default.
Figure 1-65 Add device
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Commissioning
154