Huawei SmartAX MA5603T Configuration Manual page 408

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Config
uration
Item
Multicas
t
Procedure
l
l
Issue 01 (2014-04-30)
Data
Internet access
-
Configure user bandwidth management.
1. Configure ADSL channel profile 3 with a minimum upstream/downstream
transmission rate 32 kbit/s, a minimum upstream/downstream reserved rate 32 kbit/s,
a maximum downstream transmission rate 10240 kbit/s and a maximum upstream
transmission rate 4096 kbit/s.
huawei(config)#adsl channel-profile quickadd 3 rate 32 32 10240 32 32
4096
2. Configure ADSL line template 3 by binding channel profile 3.
huawei(config)#adsl line-template quickadd 3 channel1 3 100 100
Bind ADSL line template 3 created in the previous step to ADSL ports 0/2/0 and 0/2/1.
Activate the ports.
huawei(config)#interface adsl 0/2
huawei(config-if-adsl-0/2)#deactivate 0
huawei(config-if-adsl-0/2)#deactivate 1
huawei(config-if-adsl-0/2)#activate 0 template-index 3
huawei(config-if-adsl-0/2)#activate 1 template-index 3
huawei(config-if-adsl-0/2)#alarm-config 0 1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
VoIP IPTV
- l Multicast mode:
l Profile 0 of
l Multicast
l Multicast IP
l Multicast IP
3 Configuring the DSLAM Services
Remarks
-
IGMP Proxy
multicast user 2:
the right to watch
only program
BTV-1
upstream port:
0/19/0
address of
program BTV-1:
224.1.1.1;
program source IP
address:
10.10.10.10
address of
program BTV-2:
224.1.1.2;
program source IP
address:
10.10.10.10
383