Huawei SmartAX MA5603T Configuration Manual page 325

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Step 2 Activate the VDSL ports, and bind the ports to the line profile and alarm profile.
Bind VDSL port 0/2/1 and VDSL port 0/4/1 to the default line profile (line profile 1) and the
default alarm profile (alarm profile 1).
huawei(config)#interface vdsl 0/2
huawei(config-if-vdsl-0/2)#deactivate 1
huawei(config-if-vdsl-0/2)#activate 1 template-index 1
huawei(config-if-vdsl-0/2)#alarm-config 1 1
huawei(config-if-vdsl-0/2)#quit
huawei(config)#interface vdsl 0/4
huawei(config-if-vdsl-0/4)#deactivate 1
huawei(config-if-vdsl-0/4)#activate 1 template-index 1
huawei(config-if-vdsl-0/4)#alarm-config 1 1
huawei(config-if-vdsl-0/4)#quit
Step 3 Configure multicast users.
1.
2.
3.
Step 4 Save the configuration.
huawei(config)#save
----End
Result
l
l
Issue 01 (2014-04-30)
huawei(config-mvlan20)#igmp match group ip 224.1.1.3 to-ip 224.1.1.4
huawei(config-mvlan20)#igmp uplink-port 0/19/0
huawei(config-mvlan20)#igmp mode proxy
huawei(config-mvlan20)#quit
Create the service channels of the multicast users.
Create service port 100 on VDSL port 0/2/1, and service port 101 on VDSL port 0/4/1.
huawei(config)#port vlan 10 0/19 0
huawei(config)#port vlan 20 0/19 0
huawei(config)#service-port 100 vlan 10 vdsl mode ptm 0/2/1 rx-cttr 2 tx-cttr
2
huawei(config)#service-port 101 vlan 20 vdsl mode ptm 0/4/1 rx-cttr 2 tx-cttr
2
Configure the attributes of the multicast users.
Enable the log reporting for multicast users 0/2/1 and 0/4/1. The authentication status and
multicast bandwidth of the multicast users do not need to be configured.
huawei(config)#btv
huawei(config-btv)#igmp user add service-port 100 log enable
huawei(config-btv)#igmp user add service-port 101 log enable
huawei(config-btv)#quit
Add the VDSL users to the multicast VLANs so that the VDSL users are multicast
members.
huawei(config)#multicast-vlan 10
huawei(config-mvlan10)#igmp multicast-vlan member service-port 100
huawei(config-mvlan10)#quit
huawei(config-btv)#multicast-vlan 20
huawei(config-mvlan20)#igmp multicast-vlan member service-port 101
huawei(config-mvlan20)#quit
VDSL user 0/2/1 can watch the programs with IP addresses 224.1.1.1 and 224.1.1.2 that
are provided by ISP 1.
VDSL user 0/4/1 can watch the programs with IP addresses 224.1.1.3 and 224.1.1.4 that
are provided by ISP 2.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuring the DSLAM Services
300