Principle Of Iptv Service Data Plan - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Item
Common
Parameter

11.2.6 Principle of IPTV Service Data Plan

The IPTV service plan mainly includes the plan of VLANs and VLAN translation policies in
different network scenarios, and the plan of IPTV services.
IPTV services include multicast service and VoD service. These two services have relationships
and independence in VLAN planning.
Issue 01 (2014-04-30)
User type
System parameter
International parameters
PSTN port attributes
Ringing current attributes
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 FTTB and FTTC Solution Configuration
Remarks
According to the service requirements, user
type needs to be specified. The user type
includes the following:
l DEL: direct exchange lines (default)
l ECPBX: earth calling PBX
l LCPBX: loop calling PBX
l PayPhone: pay phone
The system parameters, including the
international version flag and message
waiting indication (MWI) mode, need to be
configured according to local standards to
ensure that the response of the user terminal
complies with the local standards.
The attributes such as the upper and lower
thresholds of the flash-hooking duration
need to be configured according to the local
standards to ensure that the response of the
user terminal complies with the local
standards.
If the PSTN port needs to support the polarity
reversal accounting, the PSTN port needs to
be configured to support the polarity reversal
pulse. Other attributes do not need to be
modified if there is no special requirement.
When the attributes of ring current are
changed, ring volume is changed. This
parameter needs to be modified according to
the local standard only when the default ring
current attribute does not comply with the
local standard.
846