Configuring The Management Channel Between An Olt And An Onu - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Item
OPGD cascading board
Procedure
l
l
----End

11.4.1.4 Configuring the Management Channel Between an OLT and an ONU

This section describes how to configure a management channel between an optical line terminal
(OLT) and an optical network unit (ONU). After the configuration, you can log in to the ONU
from the OLT and configure the ONU.
Context
FTTx V100R012 or later supports remote software commissioning using GE upstream
transmission. Similar to the remote software commissioning function supported by a PON
network, the remote software commissioning using GE upstream transmission implements one
site visit for newly deployed GE-upstream devices. Before using remote software
commissioning using GE upstream transmission, learn the following prerequisites and notes.
Prerequisite
Version requirements:
l
l
l
Networking requirements:
Issue 01 (2014-04-30)
Configure the working mode of an ETHB cascading board to cascade.
huawei(config)#interface eth 0/3
huawei(config-if-eth-0/3)#network-role cascade
huawei(config-if-eth-0/3)#quit
NOTICE
If the working mode of the ETHB cascading board was originally extend, the board restarts
after this operation is performed.
Configure the working mode of an OPGD cascading board to cascade.
huawei(config)#interface opg 0/2
huawei(config-if-opg-0/2)#network-role cascade
huawei(config-if-opg-0/2)#quit
The OLT version is V800R012 or later.
The ONU version is V800R312/V800R012 (for MA5603Ts and MA5608Ts) or later.
On a cascading network consisting of multiple cascaded devices, all devices on the network
meet the preceding version requirements. For example, the networking of a cascading
network is as follows: OLT -> ONU -> ONU. If an ONU version is earlier than V800R312,
the remote software commissioning using GE upstream transmission cannot be used on the
network.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 FTTB and FTTC Solution Configuration
Data
Cascading port: 0/2/0
1026