Verifying Services - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide

13.3.3.9 Verifying Services

This topic describes how to verify the IP PBX access service by testing calls.
Prerequisites
The IP PBX access service has been deployed.
Procedure
Step 1 Test calls between users connected to the IP PBX according to table 1.
Step 2 Test calls from a user connected to the IP PBX to an IMS user according to table 1.
Step 3 Test calls from an IMS user to a user connected to the IP PBX according to table 1.
Table 13-6 IP PBX access service verification
Categ
ory
Prereq
uisites
Test
proced
ure
Expect
ed
result
----End
Issue 01 (2014-04-30)
Test Calls Between
Users Connected to
the IP PBX
1. User A and user B
access the network
through the IP
PBX and both
users have been
registered.
2. User A and user B
are idle.
1. User A calls user
B.
2. User B answers the
call. Check the call
between user A
and user B.
3. User A releases the
call.
1. User B hears the
ringing tone.
2. The call is set up.
3. The call is
released.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13 FTTO Configuration (Large-sized Enterprise Access)
Test Calls from a User
Connected to the IP PBX
to an IMS User
1. User A accesses the
network through the IP
PBX and has been
registered.
2. User B is a common IMS
user and has been
registered.
3. User A and user B are
idle.
The same as that in the "Test
Calls Between Users
Connected to the IP PBX"
column
The same as that in the "Test
Calls Between Users
Connected to the IP PBX"
column
Test Calls from an IMS
User to a User
Connected to the IP PBX
1. User A is a common
IMS user and has been
registered.
2. User B accesses the
network through the IP
PBX and has been
registered.
3. User A and user B are
idle.
The same as that in the
"Test Calls Between Users
Connected to the IP PBX"
column
The same as that in the
"Test Calls Between Users
Connected to the IP PBX"
column
1312