Configuring Services In Various Fttb And Fttc Scenarios (Ethernet Cascading); Fttb And Fttc Ethernet Cascade Networking (Onu Works As An Independent Ne); Service Requirements And Usage Scenario - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
l
----End
11.4 Configuring Services in Various FTTB and FTTC
Scenarios (Ethernet Cascading)
This section describes how to configure services when a multi-dwelling unit (MDU) serving as
an independent node or GE remote extended subrack cascades with an optical line terminal
(OLT)through Ethernet port.
11.4.1 FTTB and FTTC Ethernet Cascade Networking (ONU Works
as an Independent NE)
Cascade a multi-dwelling unit (MDU) to an optical line terminal (OLT) using an Ethernet access
board, the MDU works as an independent NE. The following topics describe the configuration
method of this scenario.

11.4.1.1 Service Requirements and Usage Scenario

If an optical network unit (ONU) works as an independent NE on a fiber to the building (FTTB)
or fiber to the curb (FTTC) Ethernet cascading network, the service requirements and usage
Issue 01 (2014-04-30)
huawei(config)#display mac-address service-port 301
Command:
display mac-address service-port 301
-------------------------------------------------------------------------
-
SRV-P BUNDLE TYPE MAC
VLANID
INDEX INDEX
-------------------------------------------------------------------------
-
301 - adl 1010-1010-1000
-------------------------------------------------------------------------
-
Total: 1
Note: F--Frame, S--Slot, P--Port,
VPI indicates ONT ID for PON, VCI indicates GEM index for GPON,
v/e--vlan/encap, pri-tag--priority-tagged,
ppp--pppoe, ip--ipoe, ip6--ipv6oe
2. On the OLT, run the display mac-address vlan command to query the learned ONU
MAC addresses. The learned ONU MAC addresses indicate that services are
functioning properly between the OLT and ONUs.
Verify the VoIP service.
1. Log in to the HGW management web page.
For details, see the
2. Choose Status > Broadband VoIP Information to query the service registration
status and telephone number.
Expected service registration status: Register successfully.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 FTTB and FTTC Solution Configuration
MAC TYPE F /S /P
dynamic
11.3.4.15 Configuring the VoIP Service (on the
VPI VCI
0 /2 /0 0 35
HGW).
300
1022