Huawei SmartAX MA5603T Configuration Manual page 705

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Item
VLAN Plan
Voice parameter
Procedure
Step 1 Configure a traffic profile.
Run the display traffic table ip command to query the existing traffic profiles in the system. If
the existing traffic profiles in the system do not meet the requirements, run the traffic table ip
command to add a traffic profile.
Step 2 Configure the mapping relationship between a GEM port and a VLAN.
The service flow of user VLAN 300 is mapped to GEM port 12 in the ONT line profile.
huawei(config)#ont-lineprofile gpon profile-name ftth
huawei(config-gpon-lineprofile-1)#gem mapping 12 2 vlan 300
huawei(config-gpon-lineprofile-1)#commit
huawei(config-gpon-lineprofile-1)#quit
Step 3 Create a service VLAN and add an upstream port to it.
Add upstream port 0/19/0 to VLAN 200.
huawei(config)#vlan 200 smart
huawei(config)#port vlan 200 0/19 0
Step 4 Create service flows.
Set the service VLAN to 200, GEM port ID to 12, and user VLAN to 300. Use traffic profile
ftth_voip.
huawei(config)#service-port vlan 200 gpon 0/1/0 ont 1 gemport 12 multi-service
user-vlan 300 inbound traffic-table name ftth_voip outboun
d traffic-table name ftth_voip
huawei(config)#service-port vlan 200 gpon 0/1/0 ont 2 gemport 12 multi-service
user-vlan 300 inbound traffic-table name ftth_voip outboun
d traffic-table name ftth_voip
Issue 01 (2014-04-30)
Data
Single VLAN tag:
l SVLAN ID: 200
l SVLAN type: smart
l SVLAN attribute: common
l CVLAN ID: 300
VLAN translation policy:
l ONT: VLANs are configured for the ONTs on the same
network in a unified manner, and the ONTs have the
same C-VLAN. The ONT adds a C-VLAN tag to
packets.
l OLT: translates the VLAN tag (C-VLAN <-> S-VLAN).
IP address of the MGC server: 200.200.200.200/24
Port ID of the MGC server: 2944
MG Domain: 0100000001 or 0100000002
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 FTTH Configuration
680