Huawei SmartAX MA5603T Configuration Manual page 535

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Item
VLAN
Slot and
port
POTS
service
NMS host 2.2.2.2 and 2.2.2.3
Log host
Time
server
Issue 01 (2014-04-30)
MA5600T-1 MA5600T-2
NMS: 10 NMS: 10
QinQ: 50 Stacking: 60-62
(inner label:
Multicast: 100
111-113)
ADSL2+:
Triple play:
1000-1031 (uses
100-102
the VLAN
authentication) ADSL2+: 1000
(uses the PPPoE
SHDSL:
authentication)
1300-1315 (uses
the VLAN SHDSL: 1300
authentication) (uses the PPPoE
authentication)
GPON: 1510 (the
ONT uses the SN POTS: 1600 (uses
+ password the H.248
authentication) protocol)
POTS: 1600
(uses the H.248
protocol)
ADSL2+: 0/2 ADSL2+: 0/2
SHDSL: 0/5 SHDSL: 0/5
GPON: 0/18 POTS: 0/3
POTS: 0/3 Stacking:
QinQ: 0/5/15 0/2/0-10 (map
VLAN 60, ISP1)
Multicast: 0/2/2,
0/2/3 0/2/11-20 (map
VLAN 61, ISP2)
0/2/21-30 (map
VLAN 62, ISP3)
Triple play: 0/2/31
MGC IP address: 10.30.80.65/24
Media/Signaling IP address of the MG interface: 10.176.6.33/24
Default media gateway of the MG interface: 10.176.6.62/24
IP address of the VLAN: 10.176.6.33/24
MG interface attributes: index is 0, supported protocol is H.248, coding type is
text, signaling port number is 2944, port number of the active MGC is 2944, and
transmission mode is UDP.
3.3.3.3 and 3.3.4.3
4.4.4.4 and 4.4.4.5
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Example: Subtending Networking
MA5600T-3 MA5600T-4
NMS: 10 NMS: 10
Multicast: 100 QinQ: 50
ADSL2+: 1000 VDSL2: 1800
(uses the PPPoE (uses the PPPoE
authentication) authentication)
SHDSL: 1300
(uses the PPPoE
authentication)
GPON: 1530 (the
ONT uses the SN
+ password
authentication)
POTS: 1600 (uses
the H.248
protocol)
ADSL2+: 0/2 SHDSL: 0/5
SHDSL: 0/5 VDSL: 0/2
GPON: 0/18 QinQ: 0/5/15
POTS: 0/3
510