Confirming A Board - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
-------------------------------------------------------------
In port 0, the total of ONTs are: 0
In port 1, the total of ONTs are: 0
In port 2, the total of ONTs are: 0
In port 3, the total of ONTs are: 0
In port 4, the total of ONTs are: 0
In port 5, the total of ONTs are: 0
In port 6, the total of ONTs are: 0
In port 7, the total of ONTs are: 0

1.3.11.2 Confirming a Board

This topic describes how to confirm a board after the board installed in an idle slot is
automatically discovered. This ensures that the auto-discovered board runs in the normal state.
Prerequisites
A board must be installed in an idle slot or all the boards in the shelf must be installed. After
that, the system automatically identifies the board type, and the board status is Auto_find.
Procedure
Step 1 Run the board confirm command to confirm an Auto_find board.
NOTE
Step 2 Run the display board frameid [ /slotid ] command to query the board status.
----End
Result
The board status is displayed as Normal.
Example
To confirm the service board in slot 0/2, do as follows:
huawei(config)#board confirm 0/2
0 frame 2 slot board confirms successfully
huawei(config)#display board 0/2
---------------------------------------
Board Name
Board Status
---------------------------------------
-----------------------------------------------------------------------------
Port
-----------------------------------------------------------------------------
Issue 01 (2014-04-30)
5 GPON 0
6 GPON 0
7 GPON 0
l To confirm only one board, run the board confirm frameid/slotid command.
l To confirm all the boards in a shelf, run the board confirm frameid command.
: ADL
: Normal
Port Type Port Status
0 ADSL Activating
1 ADSL Activating
2 ADSL Activating
3 ADSL Activating
4 ADSL Activating
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
20 -
20 -
20 -
Line Profile Alarm Profile
1002
1002
1002
1002
1002
1 Commissioning
Ext Profile
1 --
1 --
1 --
1 --
1 --
73