Huawei SmartAX MA5603T Configuration Manual page 366

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Service Requirements
l
l
Networking
Figure 3-17
Figure 3-17 Example of the ISDN PRA service
Data Plan
Table 3-11
Table 3-11 Data plan for configuring the ISDN PRA service
Item
MG interface ID
Issue 01 (2014-04-30)
The PBX is connected to the MA5600T/MA5603T/MA5608T through the ISDN PRI. PRI
supports a data rate of 2048 kbit/s, including 30 B channels and one D channel. The rate
of both the B channel and the D channel is 64 kbit/s.
After the configuration is completed, users of the PBX can make calls successfully and can
communicate with users outside the PBX in the normal state.
shows an example of the ISDN PRA service.
provides the data plan for configuring the ISDN PRA service.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuring the DSLAM Services
Data
0
341