Enabling The Ont Automatic Discovery Function; Testing The Optical Power Of An Optical Port; Measuring The Transmit Optical Power Of An Olt Pon Port - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Result
All the service ports are in the normal state. That is :
l
l

1.3.14 Enabling the ONT Automatic Discovery function

After the ONT automatic discovery function is enabled, online ONTs can be automatically
displayed on the OLT.
Procedure
Step 1 Run the port portid ont-auto-find command to enable the auto discovery function of the ONT.
Step 2 Run the port fec(gpon)command to enable the forward error correction (FEC) function.
NOTE
Only GPON supports this operation.
----End
Result
Run the display port info(gpon) command to query the configuration.
huawei(config-if-gpon-0/3)#display port info
{ portid<U><0,7> }:0
Command:
--------------------------------------------------------
F/S/P
Min distance(km)
Max distance(km)
Left guaranteed bandwidth(kbps)
Number of T-CONTs
Autofind
FEC check
Laser switch
ONT encryption key switching interval(m)
--------------------------------------------------------

1.3.15 Testing the Optical Power of an Optical Port

This topic describes how to check whether the optical signal transmit and receive modules are
normal by testing the mean launched power and the actual input power.

1.3.15.1 Measuring the Transmit Optical Power of an OLT PON Port

Check whether the optical module on a PON port of the OLT works properly by measuring the
transmit optical power.
Prerequisites
l
Issue 01 (2014-04-30)
If the user port is an ADSL2+ port: Status is displayed as Activated.
If the user port is a GPON port: Status is displayed as Activated, and Laser state is
displayed as Normal.
display port info 0
The OLT is powered on.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
0/3/0
0
20
1240576
0
Enable
Enable
On
Disable
1 Commissioning
76