Checking The Software State - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Result
After logging in to the system, you can maintain and manage the MA5600T/MA5603T/
MA5608T.
NOTE
Follow-up Procedure
l
l

1.3.6 Checking the Software State

This topic describes how to verify that current software state meets the deployment requirement.
Procedure
Step 1 Run the display language command to check whether the version of the host software meets
the deployment requirement.
Step 2 Run the display patch command to check whether the version of the patch meets the deployment
requirement.
Step 3 Run the display version command to check whether the version of the board software meets
the deployment requirement.
Step 4 Run the display board command to check whether the state of the boards meets the deployment
requirement.
l
l
----End
Issue 01 (2014-04-30)
To improve the system security, please modify your password after first login. You can run the terminal
user password command to modify your password.
You can run the idle-timeout command to set the terminal timeout time. if you do not input
commands within the specified timeout time, the system disconnects the terminal. By
default, the terminal timeout time is set to 5 minutes. If you do not run any commands
within 5 minutes, the system disconnects with the terminal. To perform any operation, you
must have to log in to the system again.
In the commissioning procedure, you must use the command, It is recommended that you
know well the command modes
Figure 1-44
Login enable
User mode
huawei>
quit disable
In the integrated access scenario (involving optical, xDSL, and voice access), use the default
configurations.
In the broadband access scenario (involving only optical and xDSL access), use the system
workscene command to switch the scenario mode of the SCUN board to the OLT mode,
ensuring that the memory is allocated properly and services are processed smoothly.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
first.Figure 1-44 shows how to switch command modes.
config
Global config mode
Privilege mode
huawei# huawei(config)#
quit
1 Commissioning
Interface/config mode
interface
huawei(config-if-...)
quit
return
61