Example: Configuring The Voip Pstn Service (Sip) - Huawei SmartAX MA5603T Configuration Manual

Access module
Hide thumbs Also See for SmartAX MA5603T:
Table of Contents

Advertisement

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Add an MG interface and configure the attributes of the MG interface. The MG interface must
be configured manually, and the configuration profile cannot be directly imported.
interface mgcp 0
if-mgcp attribute mgip 10.10.10.10 mgport 2727 mgcip_1 10.10.20.20 mgcport_1 2727
domainName huawei
Configure the ringing mapping of the MG interface.
mg-ringmode add 0 0 4
Configure the TID format of the PSTN user on the MG interface.
tid-format pstn prefix huawei template 6
quit
Enable the MG interface. The MG interface must be enabled manually, and the configuration
profile cannot be directly imported.
reset
Query the running status of the MG interface.
display if-mgcp all
Confirm the service board.
board confirm 0/3
Configure the PSTN user data.
esl user
mgpstnuser batadd 0/3/0 0/3/31 0
quit
Configure the polarity reversal accounting function.
pstnport
pstnport attribute batset 0/3/0 0/3/31 reverse-pole-pulse enable
Save the data.
quit
save

3.3.3 Example: Configuring the VoIP PSTN Service (SIP)

This topic describes the configuration example of the VoIP PSTN service based on sip protocol.
Service Requirements
In an office located in China, the MA5600T/MA5603T/MA5608T that adopts the SIP protocol
is newly deployed. Data plan and configuration, however, are not performed on the IMS
(softswitch) connected to the MA5600T/MA5603T/MA5608T. The MA5600T/MA5603T/
MA5608T is required to provide the following VoIP services:
l
l
After the service requirements are further confirmed and analyzed with the office, the data plan
is made by considering the interconnection with the IMS and according to the data plan described
in Configuring the VoIP Service (SIP-based).
the SIP-based VoIP service.
Issue 01 (2014-04-30)
The common phone services are provisioned to 128 users (phones 0-127).
The polarity-reversal accounting is adopted.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuring the DSLAM Services
Table 3-5
provides the data plan for configuring
316

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartax ma5600tSmartax ma5608t

Table of Contents