Huawei SmartAX MA5603T Configuration Manual page 689

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
l
Issue 01 (2014-04-30)
Set the profile ID to ftth_hsi, the CIR to 4 Mbit/s, and the priority to 0. In addition,
configure the scheduling mode so that packets are scheduled according to their
priorities.
huawei(config)#traffic table ip name ftth_hsi cir 4096 priority 0 priority-
policy local-setting
2. Configure the mapping relationship between a GEM port and a VLAN.
The service flow of user VLAN 1001 is mapped to GEM port 14 in the ONT line
profile.
huawei(config)#ont-lineprofile gpon profile-name ftth
huawei(config-gpon-lineprofile-1)#gem mapping 14 0 vlan 1001
huawei(config-gpon-lineprofile-1)#commit
huawei(config-gpon-lineprofile-1)#quit
3. Create a service VLAN and add an upstream port to it.
Add upstream port 0/19/0 to VLAN 100.
huawei(config)#vlan 100 smart
huawei(config)#vlan attrib 100 stacking
huawei(config)#port vlan 100 0/19 0
4. Create service flows.
Set the service VLAN to 100, GEM port ID to 14, and user VLAN to 1001, and use
traffic profile ftth_hsi.
huawei(config)#service-port vlan 100 gpon 0/1/0 ont 1 gemport 14 multi-
service
user-vlan 1001 tag-transform translate-and-add inner-vlan 1010 inbound
traffic-table name
ftth_hsi outbound traffic-table name ftth_hsi
huawei(config)#service-port vlan 100 gpon 0/1/0 ont 2 gemport 14 multi-
service
user-vlan 1001 tag-transform translate-and-add inner-vlan 1011 inbound
traffic-table name
ftth_hsi outbound traffic-table name ftth_hsi
5. Save the data.
huawei(config)#save
Configure the ONT on the Web page.
Log in to the Web page and then configure the ONT on the Web page.
1. Configure the IP address of the PC network adapter to be in the same network segment
with the IP address of the local maintenance Ethernet port on the ONT (default:
192.168.100.1).
2. Open the Web browser, and enter the IP address (https://192.168.100.1:80 or http://
192.168.100.1) (https with high priority is recommended) of the local maintenance
Ethernet port on the ONT. In the login window that is displayed, enter the user name
(default telecomadmin) and password (default admintelecom) of the administrator.
After the password is authenticated, the web configuration window is displayed.
NOTE
The Web page for configuring ONT varies with ONT versions, but the parameter configuration is the
same. For details, see relevant ONT manuals.
1. Configure the working mode of a LAN port.
The LAN port bound to the WAN port must work in the Layer 3 mode. Therefore, set
the working mode to Layer 3 for the LAN port connected to the PC.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 FTTH Configuration
664