Adding An Onu To An Olt - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Item
ONU
OLT
ONU
ONU

11.3.1.3 Adding an ONU to an OLT

Services can be configured for an ONU only after the ONU is successfully added to an OLT.
Context
l
Issue 01 (2014-04-30)
Procedure
Configure the Internet access
service.
Configure the
VoIP service
Configure the link aggregation,
congestion control, and security
policy.
Verify the service.
When an ONU is added, corresponding profiles need to be bound to the ONU, including
the dynamic bandwidth allocation (DBA) profile, line profile, and alarm profile. For details
about functions and configuration methods for these profiles, see
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 FTTB and FTTC Solution Configuration
Remarks
This topic describes how to configure the
Internet access service through the Ethernet
port by the ONU. Specifically, configure
service flows on the ONU and configure the
upstream VLAN to provide the service
channel from the ONU to the user and set up
the upstream channel from the ONU to the
OLT.
Configure the NOTE
The H.248 and SIP protocols are mutually
H.248 VoIP
exclusive for the VoIP service. Only one of them
service on the
is configured at a time.
ONU.
Configure the
SIP VoIP
service on the
ONU.
The global configuration of upstream link
aggregation and queue scheduling based on
priorities ensures service reliability. The
global configuration of security policies
ensures service security.
The ONU provides remote verification
methods including PPPoE dialup emulation
and call emulation for configuration and
commissioning engineers to verify services
remotely after service configuration,
avoiding a second on-site operation.
Table 11-5.
860