Basic Configurations - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
About This Chapter
Basic configurations mainly include certain common configurations, public configurations, and
pre-configurations in service configurations. There is no obvious logical relation between basic
configurations. You can perform basic configurations according to actual requirements.
2.1 Configuring Alarms
Alarm management includes the following functions: alarm record, alarm setting, and alarm
statistics. These functions help you to maintain the device and ensure that the device works
efficiently.
2.2 Adding Port Description
This topic describes how to add port description.
2.3 Configuring the Attributes of an Upstream Ethernet Port
This topic describes how to configure the attributes of a specified Ethernet port so that the system
communicates with the upstream device in the normal state.
2.4 Configuring AAA
This topic describes how to configure the AAA on the MA5600T/MA5603T/MA5608T,
including configuring the MA5600T/MA5603T/MA5608T as the local and remote AAA
servers.
2.5 Configuring DOCSIS Event Reporting
DOCSIS 3.0 defines various DOCSIS events, such as authentication failure and CM certificate
error events. Configuring DOCSIS event reporting helps you obtain MA5600T/MA5603T/
MA5608T and CM running status.
Issue 01 (2014-04-30)
2
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.

Basic Configurations

2 Basic Configurations
218