Measuring The Receive Optical Power Of An Olt Pon Port - Huawei SmartAX MA5603T Configuration Manual

Access module
Hide thumbs Also See for SmartAX MA5603T:
Table of Contents

Advertisement

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
NOTE
Step 3 Compare the test result with the optical module parameters of the corresponding board in the
hardware description.
----End
Result
l
l

1.3.15.2 Measuring the Receive Optical Power of an OLT PON Port

Determine whether there are continuous mode ONUs or rogue ONUs by measuring the optical
power of the OLT PON port.
Prerequisites
l
l
l
Tools, Meters and Materials
Burst optical power meter
Impact on System
When the receive optical power of a PON port on the OLT is measured, corresponding PON
port will fail to transmit any service.
Precautions
Do not look into the optical port or the optical fiber connector without eye protection.
Before or after measuring the optical power, you need to clean the connector of the optical fiber.
This is because if a contaminated optical fiber is connected to a normal optical fiber connector,
the connector will be contaminated, which leads to abnormal attenuation and reflection and thus
affecting optical path quality.
Issue 01 (2014-04-30)
l If the value on the optical power meter changes within a range of 0.2 dBm, take the average value.
l If the value on the optical power meter changes in a range wider than 0.2 dBm, then it is possible that
the fiber is not properly connected, the fiber is excessively bent, or the fiber connector has dust.
l Do not bend the fiber. A bent fiber may affect the test result.
If the test result is between the maximum and minimum output optical power of the optical
module of the board, it indicates that the optical module works properly.
If the test result is no between the maximum and minimum output optical power of the
optical module of the board, it indicates that the optical module does not work properly.
The ONU is powered on.
The ONU PON port is enabled.
The optical fiber between the OLT and the ONU is properly connected.
DANGER
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Commissioning
78

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartax ma5600tSmartax ma5608t

Table of Contents