Huawei SmartAX MA5603T Configuration Manual page 256

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Issue 01 (2014-04-30)
Parameter Code
24
25
27
29
31
32
40
41
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Parameter Name
State
Class
Session-Timeout
Termination-Action
Calling-Station-Id
NAS-Identifier
Acct-Status-Type
Acct-Delay-Time
2 Basic Configurations
Description
If the access challenge packet
that the RADIUS server sends to
a device contains this parameter,
the subsequent access request
packet sent by the device to the
RADIUS server must also
contain this parameter of the
same value as that is contained in
the access challenge packet.
If the access accept packet sent
by the RADIUS server to a
device contains this parameter,
the subsequent charging request
packet sent by the device to the
RADIUS server must also
contain this parameter of the
same value.
For a standard RADIUS server, a
device can use the Class attribute
to represent the CAR parameter.
Indicates the available remaining
time in the unit of second. It is the
user re-authentication time in the
EAP challenge packet.
Indicates the service termination
mode. The valid modes are re-
authentication and forcing users
to go offline.
Allows the NAS to send the
calling number.
Indicates the host name of the
device.
Indicates the charging packet
type.
l 1: charging start packet
l 2: charging stop packet
l 3: real-time charging packet
Indicates the time for generating
a charging packet in the unit of
second.
231