Creating Multicast Boundaries And Domains; Enabling Pim-Sm Graceful Restart - Dell C9000 Series Networking Configuration Manual

Hide thumbs Also See for C9000 Series:

Table of Contents

EXEC Privilege mode

show ip pim interface

Creating Multicast Boundaries and

A PIM domain is a contiguous set of routers that all implement PIM and are configured to operate within a

common boundary defined by PIM multicast border routers (PMBRs).

PMBRs connect each PIM domain to the rest of the Internet.

Create multicast boundaries and domains by filtering inbound and outbound bootstrap router (BSR) messages

per interface. The following command is applied to the subsequent inbound and outbound updates. Timeout

removes existing BSR advertisements.

Create multicast boundaries and domains by filtering inbound and outbound BSR messages per interface.

ip pim bsr-border

Remove candidate RP advertisements.

clear ip pim rp-mapping

To enable PIM-SM graceful restart, use the following commands.

Enable PIM-SM graceful restart (non-stop forwarding capability).

CONFIGURATION mode

ip pim graceful-restart nsf

When NSF capability is disabled by configuration, the configured values for restart-time and stale-

entry-time are reset to default values.

The restart-time and stale-entry-time options can be configured only when NSF is enabled on the

(option) restart-time: the time the Dell Networking system requires to restart. The default value is

120 seconds.

(option) stale-entry-time: the maximum amount of time that the Dell Networking system

preserves entries from a restarting neighbor. The default value is 60 seconds. .

PIM Sparse-Mode (PIM-SM)

Troubleshooting