Advertising TLVs
You can configure the system to advertise TLVs out of all interfaces or out of specific interfaces.
•
If you configure the system globally, all interfaces send LLDPDUs with the specified TLVs.
•
If you configure an interface, only the interface sends LLDPDUs with the specified TLVs.
•
If you configure LLDP both globally and at interface level, the interface level configuration overrides the
global configuration.
To advertise TLVs, use the following commands.
1
Enter LLDP mode.
CONFIGURATION or INTERFACE mode
protocol lldp
2
Advertise one or more TLVs.
PROTOCOL LLDP mode
advertise {management-tlv | dot1-tlv | dot3-tlv | med}
Include the keyword for each TLV you want to advertise.
•
For management TLVs: system-capabilities, system-description.
•
For 802.1 TLVs: port-protocol-vlan-id, port-vlan-id.
•
For 802.3 TLVs: max-frame-size.
•
For TIA-1057 TLVs:
•
guest-voice
•
guest-voice-signaling
•
location-identification
•
power-via-mdi
•
softphone-voice
•
streaming-video
•
video-conferencing
•
video-signaling
•
voice
•
voice-signaling
Link Layer Discovery Protocol (LLDP)
666