Table of Contents
Advertisement
Apr 3 05:52:52: %RPM1-P:CP %IFMGR-5-OSTATE_DN: Changed interface state to
down: Po 458
Apr 3 05:54:35: %RPM1-P:CP %IFMGR-5-OSTATE_UP: Changed interface state to up:
Te 0/22
Apr 3 05:54:35: %RPM1-P:CP %IFMGR-5-OSTATE_UP: Changed interface state to up:
Te 0/23
Apr 3 05:54:35: %RPM1-P:CP %IFMGR-5-OSTATE_DN: Changed interface state to
down: Te 0/22
Apr 3 05:54:35: %RPM1-P:CP %IFMGR-5-OSTATE_DN: Changed interface state to
down: Te 0/23
Apr 3 05:54:35: %RPM1-P:CP %IFMGR-5-OSTATE_UP: Changed interface state to up:
Te 0/22
Apr 3 05:54:35: %RPM1-P:CP %IFMGR-5-OSTATE_UP: Changed interface state to up:
Te 0/23
Apr 3 05:54:57: %RPM1-P:CP %BRM-5-PE_DISCOVERED: PE:f8:b1:56:00:02:8a is
detected on cascade port:TenGigabitEthernet 0/22.
Apr 3 05:54:57: %RPM1-P:CP %IFMGR-5-OSTATE_UP: Changed interface state to up:
Po 458
Apr 3 05:54:57: %RPM1-P:CP %BRM-5-PE_DISCOVERED: PE:f8:b1:56:00:02:8a is
detected on cascade port:TenGigabitEthernet 0/23.
Apr 3 05:55:01: %RPM1-P:CP %BRM-5-PE_UNIT_UP: PE:200 Unit:2 Unit
MAC:f8:b1:56:00:02:8a is operationally up.
Apr 3 05:55:01: %RPM1-P:CP %BRM-5-PE_UP: PE:200 MAC:f8:b1:56:00:02:8a is
operationally up.
Apr 3 05:55:06: %RPM1-P:CP %POEMGR-5-POE_CONTROLLER_FW_MISMATCH: POE
Controller FW Version mismatch reported in port extender 200 stack unit 2
Apr 3 00:41:00: %PE200-C1048P:2 %POLLMGR-2-USER_FLASH_STATE: USB flash disk
missing in 'usbflash:'
Apr 3 00:41:00: %PE200-UNIT2-U:CP %RAM-6-ELECTION_ROLE: Stack-unit 2 is
transitioning to Management Stack-unit.
Apr 3 00:41:00: %PE200-UNIT2-M:CP %CHMGR-5-CHMCANNOTDO: Unable to read RPM 0
mfg eeprom - not programmed?
Apr 3 00:41:00: %PE200-UNIT2-M:CP %CHMGR-5-CHMCANNOTDO: Unable to read chassis
mfg eeprom - not programmed?
Apr 3 00:41:01: %PE200-UNIT2-M:CP %CHMGR-5-STACKUNIT_DETECTED: stack-unit 2
present
Apr 3 00:41:01: %PE200-UNIT2-M:CP %CHMGR-5-CHECKIN: Checkin from stack-unit 2
(type C1048P, 52 ports)
Apr 3 00:41:01: %PE200-C1048P:2 %CHMGR-2-FAN_SPEED_CHANGE: Fan speed changed
to 60 % of the full speed
Apr 3 00:41:01: %PE200-C1048P:2 %CHMGR-2-FAN_SPEED_CHANGE: Fan speed changed
to 75 % of the full speed
Apr 3 00:41:01: %PE200-UNIT2-M:CP %RAM-5-STACKUNIT_STATE: Stack-unit 2 is in
Active State.
Apr 3 00:41:01: %PE200-UNIT2-M:CP %IFMGR-5-ASTATE_UP: Changed interface Admin
state to up: Te 2/1
Apr 3 00:41:01: %PE200-UNIT2-M:CP %IFMGR-5-ASTATE_UP: Changed interface Admin
state to up: Te 2/2
Apr 3 00:41:01: %PE200-UNIT2-M:CP %CHMGR-5-STACKUNIT_UP: stack-unit 2 is up
Apr 3 00:41:02: %PE200-UNIT2-M:CP %CHMGR-5-PEM_INSERTED: Power entry module 0
of unit 2 is inserted
Apr 3 00:41:02: %PE200-UNIT2-M:CP %CHMGR-0-PS_UP: Power supply 0 in unit 2 is
up
Apr 3 00:41:02: %PE200-UNIT2-M:CP %CHMGR-5-PEM_REMOVED: Power entry module 1
of unit 2 is absent
Apr 3 00:41:02: %PE200-UNIT2-M:CP %CHMGR-5-FANTRAY_INSERTED: Fan tray 0 of
Unit 2 is inserted
Apr 3 00:41:02: %PE200-UNIT2-M:CP %CHMGR-2-SYSTEM_READY: System ready
Apr 3 00:41:02: %PE200-UNIT2-M:CP %CHMGR-4-TEMP_STATUS_CHANGE:
Unit 2
temperature state changed to 1 (Current temperature 36C).
Apr 3 00:41:02: %PE200-UNIT2-M:CP %SEC-5-LOGIN_SUCCESS: Login successful on
console
Port Extenders (PEs)
842
Advertisement
Table of Contents
Troubleshooting
