Enabling HiGig Link-Bundle Monitoring
To enable the monitoring of HiGig link bundles, follow these steps.
1
Enable the monitoring of traffic distribution on the member links in a HiGig link bundle (port-channel).
CONFIGURATION mode
Dell(conf)#hg-link-bundle-monitor {sfm npu-id hg-port—channel hg-port—channel-
id | slot slot npuUnit npu-id hg-port—channel 0} enable
2
Specify the trigger threshold for HiGig link-bundle monitoring.
CONFIGURATION mode
Dell(conf)#hg-link-bundle-monitor trigger-threshold percentage
3
Specify the interval (in seconds) when HiGig link-bundle monitoring is performed.
CONFIGURATION mode
Dell(conf)#hg-link-bundle-monitor rate-interval seconds
4
Enable SNMP trap generation for HiGig link-bundle monitoring.
CONFIGURATION mode
Dell(conf)#snmp-server enable traps hg-lbm
5
Display the traffic utilization of member links in a HiGig link bundle (port channel).
EXEC, EXEC Privilege modes
Dell#show hg-link-bundle-distribution {sfm npu-id hg-port—channel hg-port—
channel-id | slot slot npuUnit npu-id hg-port—channel 0}
Non Dell-Qualified Transceivers
The system supports Dell-qualified transceivers and only some of the non Dell-qualified transceivers.
The system supports the following cables and adapters:
•
DAC cables
•
AOC cables
•
AOC fan-out cables
•
DAC fan-out cables
•
40G fiber breakout cables
•
10G AOC and DAC cables
•
1G optics
•
QSA
Interfaces
531