Dell C9000 Series Networking Configuration Manual page 261

L2Acl :
Ipv4Acl :
Ipv6Acl :
Ipv4Qos :
L2Qos :
L2PT :
IpMacAcl :
VmanQos :
EcfmAcl :
Openflow :
-- linecard 1 --
Current Settings(in block sizes)
L2Acl :
Ipv4Acl :
Ipv6Acl :
Ipv4Qos :
L2Qos :
L2PT :
IpMacAcl :
VmanQos :
EcfmAcl :
Openflow :
-- linecard 2 --
Current Settings(in block sizes)
L2Acl :
Ipv4Acl :
Ipv6Acl :
Ipv4Qos :
L2Qos :
L2PT :
IpMacAcl :
VmanQos :
EcfmAcl :
Openflow :
The ipv6acl and vman-dual-qos allocations must be entered as a factor of 2 (2, 4, 6, 8, 10). All other
profile allocations can use either even or odd numbered ranges.
You must save the new CAM settings to the startup-config (write-mem or copy run start) then reload the
system for the new settings to take effect.
1 Select a cam-acl action.
CONFIGURATION mode
cam-acl [default | l2acl]
NOTE: Selecting default resets the CAM entries to the default settings. Select l2acl to allocate
space for the ACLs and QoS regions.
2 Enter the number of FP blocks for each region.
EXEC Privilege mode
l2acl number ipv4acl number ipv6acl number, ipv4qos number l2qos number, l2pt
number ipmacacl number ecfmacl number [vman-qos | vman-dual-qos number
5
4
0
2
1
0
0
0
0
0
1 block = 256 entries
5
4
0
2
1
0
0
0
0
0
1 block = 256 entries
5
4
0
2
1
0
0
0
0
0
Content Addressable Memory (CAM) 261