Table of Contents
Advertisement
Configuring Set Conditions
To configure a set condition, use the following commands.
•
Add an AS-PATH number to the beginning of the AS-PATH.
CONFIG-ROUTE-MAP mode
set as-path prepend as-number [... as-number]
•
Generate a tag to be added to redistributed routes.
CONFIG-ROUTE-MAP mode
set automatic-tag
•
Specify an OSPF area or ISIS level for redistributed routes.
CONFIG-ROUTE-MAP mode
set level {backbone | level-1 | level-1-2 | level-2 | stub-area}
•
Specify a value for the BGP route's LOCAL_PREF attribute.
CONFIG-ROUTE-MAP mode
set local-preference value
•
Specify a value for redistributed routes.
CONFIG-ROUTE-MAP mode
set metric {+ | - | metric-value}
•
Specify an OSPF or ISIS type for redistributed routes.
CONFIG-ROUTE-MAP mode
set metric-type {external | internal | type-1 | type-2}
•
Assign an IP address as the route's next hop.
CONFIG-ROUTE-MAP mode
set next-hop ip-address
•
Assign an IPv6 address as the route's next hop.
CONFIG-ROUTE-MAP mode
set ipv6 next-hop ip-address
•
Assign an ORIGIN attribute.
CONFIG-ROUTE-MAP mode
set origin {egp | igp | incomplete}
•
Specify a tag for the redistributed routes.
CONFIG-ROUTE-MAP mode
set tag tag-value
•
Specify a value as the route's weight.
CONFIG-ROUTE-MAP mode
set weight value
Access Control Lists (ACLs)
159
Advertisement
Table of Contents
Troubleshooting
