Table of Contents
Advertisement
Linecard2
Linecard3
Linecard4
Linecard5
Linecard6
Linecard7
Linecard8
Linecard9
Linecard10
Linecard11
PE (0/0)
PE (0/1)
***********************************************************************
*
Warning - Upgrading boot flash is inherently risky and should only *
*
be attempted when necessary.
*
a board RMA.
***********************************************************************
Proceed Boot Flash image for all cards [yes/no]: yes
!!!!!!Sep 7 19:20:23: %RPM0-P:CP %DOWNLOAD-6-UPGRADE: PE 0 manual upgrade
result - upgrade success.
!!!!!
Bootflash image upgrade for all cards completed successfully.
Warning: Kindly save the system configuration before reloading.
Dell#
2
Use the upgrade system-image all command to upgrade the image in both the CB and the PE.
Dell#upgrade
system-image
Address or name of remote host []: 10.16.127.141
Source file name []: $w/Releases/E9.9.0/E9.9.0.0/FTOS-C9000-9.9.0.0.bin
User name to login remote host: admin
Password to login remote
host:
!!!!!!Sep 6 19:16:06: %RPM0-P:CP %KERN-6-INT: CP Mgmt port receiving excessive
traffic; will be rate controlled
- repeated 6 times
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Sep 6 19:16:58: %RPM0-P:CP
%KERN-6-INT: CP Mgmt port receiving excessive traffic; will be rate controlled
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Sep 6 19:17:27: %RPM0-P:CP %KERN-6-INT: CP CPU
receiving excessive Management traffic: rx is suspended
!....!!!!Sep 6 19:17:36: %RPM0-P:CP %KERN-6-INT: CP Mgmt port receiving
excessive traffic; will be rate controlled
!!.........................!...................................................
.................
Image upgraded to CP.
!!!!!!!!!!!!!!%PE200-UNIT2-M:CP %DOWNLOAD-6-UPGRADE: Upgrade request received
from Controlling Bridge.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!Apr 3 08:47:20: %RPM1-P:CP %DOWNLOAD-6-UPGRADE: PE
200 manual upgrade result - upgrade success.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!
PE (200) Image upgraded successfully.
Image upgraded to RP, Standby RPM and all linecards.
3
Use the reload pe option to reload both CB and PE.
Boot Flash
Boot Flash
Boot Flash
Boot Flash
Boot Flash
Boot Flash
Boot Flash
Boot Flash
Boot Flash
Boot Flash
Boot Flash
Boot Flash
A failure at this upgrade may cause
Proceed with caution !
all
ftp: B:
3.3.1.16
3.3.1.16
3.3.1.16
3.3.1.16
3.3.1.16
3.3.1.16
3.3.1.16
3.3.1.16
3.3.1.16
3.3.1.16
3.3.1.7
3.3.1.7
- repeated 12 times
3.3.1.18
3.3.1.18
3.3.1.18
3.3.1.18
3.3.1.18
3.3.1.18
3.3.1.18
3.3.1.18
3.3.1.18
3.3.1.18
3.3.1.7
3.3.1.7
*
*
!!!!!!!!!
Port Extenders (PEs)
840
Advertisement
Table of Contents
Troubleshooting
