Tools; Work Completion Check - Epson Artisan 810 Service Manual

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD

4.1.2 Tools

Use only specified tools to avoid damaging the printer.
Table 4-1. Tools
Name
(+) Phillips screwdriver #1
(+) Phillips screwdriver #2
Flathead screwdriver
Flathead Precision screwdriver #1
Tweezers
Longnose pliers
Acetate tape
Nippers
Ink Supply Tube screwing tool
PG adjustment tool
Leak Check jig
Air Release jig
Carriage Stopper jig
Hook releaser
Note *1 : Some of the tools listed above are commercially available.
*2 : EPSON provides the tools listed with EPSON tool code.
*3 : Consult I&I CS Quality Assurance Department for how to get the Leak Check jig,
the Air release jig and the Carriage stopper jig.
*4 : Epson Artisan 835/837/Epson Stylus Photo PX820FWD/TX820FWD/PX830FWD
only. This tool can be made with a metal plate. For the details, see
Unit" (p.264).
DISASSEMBLY/ASSEMBLY
Availability EPSON Tool Code*
O 1080530
O ---
O ---
O ---
O ---
O ---
--- 1003963
O ---
--- 1508164
--- 1508165
--- ---
--- ---
--- ---
--- ---
"8.3.2.1 ADF

4.1.3 Work Completion Check

If any service is made to the printer, use the checklist shown below to confirm all
works are completed properly and the printer is ready to be returned to the user.
Table 4-2. Work Completion Check
Classification Item
Self-test
ON-line Test
Printhead (Nozzle
check pattern print)
Carriage Mechanism
Printer Unit
Paper Feeding
Mechanism
Case open sensor
check
Transmission Arm
position
Overview
Revision G
Check Point Status
Is the operation normal? OK /
Is the printing successful? OK /
Is ink discharged normally from
OK /
all the nozzles?
Does it move smoothly? OK /
Is there any abnormal noise
OK /
during its operation?
Is the CR Motor at the correct
temperature? (Not too hot to OK /
touch?)
Is paper advanced smoothly? OK /
No paper jamming? OK /
No paper skew? OK /
No multiple feeding? OK /
No abnormal noise? OK /
Is the paper path free of any
OK /
obstructions?
Is the PF Motor at correct
OK /
temperature?
Does case open sensor operate
normally? (See Chapter 5 OK /
"ADJUSTMENT".)
Is the Transmission Arm set at
the Ink System position? (See OK /
"4.2.5.7 Ink System" (p.147).)
Confidential
NG
NG
NG
NG
NG
NG
NG
NG
NG
NG
NG
NG
NG
NG
NG
102