Epson Artisan 810 Service Manual page 127

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
CN21 CN49
CN22 CN24 CN25 CN13
CN501
Figure 4-41. Connector position on the Main Board
2. Remove the screw (x1) that secures the Right Cable Frame and the Main
Board. (See Fig. 4-42.)
3. Remove the screw (x1) that secures the Grounding Plate M/B, and remove the
Grounding Plate M/B. (See
4. Remove the screws (x4) that secure the Main Board Unit and remove the
Main Board Unit.
DISASSEMBLY/ASSEMBLY
CN8 CN51
CN41 CN10 CN12 CN9 CN33
CN36 CN6 CN4 CN3 CN2
Fig. 4-42.)
CN1
CN5
CN19
CN31
CN7
Step 3
Grounding Plate M/B
Positioning hole & dowel
Disassembly Procedures
Right Cable Frame
Step 2
Main Board Unit
C.B.S. 3x4 (8±1Kgfcm)
C.B.S. 3x6 (8±1Kgfcm)
C.B.S. 3x6 (6±1Kgfcm)
Figure 4-42. Removing the Main Board Unit
Revision G
Holder IC Shield Plate
C.B.S. 3x6 (5±0.5Kgfcm)
C.B.P. 3x8 (6±1Kgfcm)
C.B.P. 3x10 (6±1Kgfcm)
127
Confidential