Epson Artisan 810 Service Manual page 247

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
Spur Gear A
Combination Gear A
Spur Gear B
Spur Gear C
Combination
Gear B
Application Point
Figure 6-10. Lubrication of the APG related gears
EJ Release Trigger
Spur Gear 17.6
Application Point
Figure 6-11. Lubrication of the Spur Gear 17.6
MAINTENANCE
<Lubrication Points>
On the toothed areas of the Spur
Gear A, B, C and Combination
Gear A, B
<Type>
G-71
<Application Amount>
φ 1 x half circle
<Application Timing>
Before installing each gear
<Remarks>
Apply with injector
<Lubrication Points>
Four contact points between the
Spur Gear 17.6 and the EJ Release
Trigger
<Type>
G-74
<Application Amount>
Ribs of the Spur Gear 17.6 x 4
points
<Application Timing>
Before installing the Transmission
Arm
<Remarks>
Apply with injector
Overview
Pick Up Roller
transmission shaft
Pick Up Roller
Application Point
Figure 6-12. Lubrication of the Pick Up Roller transmission shaft
Spur Gear 36
Base Frame
Application Point
Figure 6-13. Lubrication of the Spur Gear 36
Revision G
<Lubrication Points>
1. Two toothed areas of the Pick
Up Roller transmission shaft
2. Two contact points between
the Pick Up Roller and Pick Up
Frame
3. Three contact points between
the Pick Up Roller
transmission shaft and Pick Up
Frame
<Type>
G-74
<Application Amount>
Sufficient quantity
<Application Timing>
Before installing the Pick Up
Roller
<Remarks>
Apply with injector
<Lubrication Points>
1. On half the toothed area of the
Spur Gear 36
2. On the shaft of the Base Frame
<Type>
G-71
<Application Amount>
Sufficient quantity
<Application Timing>
Before installing the CDR Guide
<Remarks>
Apply with injector
247
Confidential