Epson Artisan 810 Service Manual page 84

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
Troubleshooting Memory Card-related Problems
Problem
Memory Card data damage
Use unsupported Memory Card
Memory card failure
Poor connection
Firmware error
Memory card can not be ejected
Electrical noise
Main board failure
Card board failure
TROUBLESHOOTING
Table 3-25. Troubleshooting Memory Card-related problems
Check Point
Is the data on the memory card damaged by static electricity
or the like?
Check if the card is supported.
Check if another Memory Card is recognized.
Are the memory card or the slot free from foreign
materials?
Is the slot pin cracked or deformed?
---
Is the memory card inserted without the memory card
adapter?
Are the positions of the FFC and ferrite core appropriate?
Check the Main Board for any damage.
Check the STG Board for any damage.
Troubleshooting without Error Message
Remedy
Check if the card is readable with the computer. If not, format
the card.
Use a supported memory card.
Replace the Memory Card with a new one.
Remove the foreign material, and clean the contact points.
Replace the Card Board.
Update the firmware.
Turn the power off and remove the memory card with the
tweezers.
Replace the Main Board with a new one if there is no problem
with the routing.
Replace the Main Board with a new one.
Replace the STG Board.
Revision G
84
Confidential