Waste Ink Tray Assy - Epson Artisan 810 Service Manual

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD

4.2.5.11 Waste Ink Tray Assy

Parts/Components need to be removed in advance:
None
Removal procedure
So as to make description easier, the printer in the photographs
C A U T I O N
is placed vertically in the following steps. Be careful about ink
spilling if the printer is tilted in practical operation.
Be careful not to get injured with the sharp edges of the
grounding plate of the Waste Ink Tray Assy.
1. Remove the screw (x1). (See
2. Insert the flathead screwdriver to the hole of the Rear Right FAX Housing to
release the hook (x1), and remove the Waste Ink Tray Assy. (See
Fig. 4-105.)
Sharp edge
Waste Ink Tray Assy
Figure 4-104. Removing the Waste Ink Tray Assy (1)
DISASSEMBLY/ASSEMBLY
Fig. 4-104.)
Hook in the hole
Flathead screwdriver
C.B.P. 3x10 (6±1Kgfcm)
Be careful about ink spilling from the Waste Ink Tube.
C A U T I O N
3. Remove the Waste Ink Tube from the Waste Ink Cover together with the Tube
Stopper, and remove the Waste Ink Tray Assy.
Fig. 4-104,
Waste Ink Tray Assy
Figure 4-105. Removing the Waste Ink Tray Assy (2)
Disassembly Procedures
Waste Ink Tube
Tube Stopper
Waste Ink Cover
Revision G
Hook
156
Confidential