Epson Artisan 810 Service Manual page 171

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
2. Open the ADF Document Support Cover.
3. Remove the screws (x3) that secure the ADF Rear Cover.
4. Release the hooks (x11) that secure the ADF Rear Cover, and remove the
ADF Rear Cover from the ADF Base Assy.
ADF Rear Cover
Figure 4-135. Removing the ADF Rear Cover
DISASSEMBLY/ASSEMBLY
ADF Document Support Cover
ADF Base Assy
C.B.P. 2.5x6 (6±1kgfcm)
C.B.P. 2.5x6 (black) (6±1kgfcm)
Hook
Disassembly Procedures
When installing the ADF Right Cover, align the positioning
holes (x2) with the dowels (x2) of the ADF Right Cover and the
ADF Base Assy, and also align the ribs (x6) shown in
ADF Right Cover
Figure 4-136. Installing the ADF Right Cover
When installing the ADF Rear Cover, align the ribs with the
grooves (x3) as shown below.
ADF Rear Cover
Figure 4-137. Installing the ADF Rear Cover
Revision G
Fig. 4-134.
Positioning hole
& dowel
Rib & Groove
171
Confidential