Epson Artisan 810 Service Manual page 202

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
ROUTING THROUGH THE FFC HOLDER
No. FFC/cable name
1 CR Encoder FFC
2 Head FFC (x4)
See Fig. 4-196 for the connector positions on the Main Board.
Insert the CR Encoder FFC and
Head FFCs (x4) together to the rib
on the FFC Holder and the hole.
Cover the Ink Supply Tube Assy with
the CR Encoder FFC and Head FFCs
(x4), and secure them to the FFC Holder.
Figure 4-206. Routing to the FFC Holder
DISASSEMBLY/ASSEMBLY
*
CN No. Remarks
CN6 ---
CN1,2,3,4 ---
FFC Holder
Rib
Hole
Fold line
Ink Supply Tube Assy
Routing FFC/cables
ROUTING AROUND THE PRINTER MECHANISM
No. FFC/cable name
1 PF Motor Cable
2 Power Supply Unit cable
Note * : See Fig. 4-196 for the connector positions on the Main Board.
Right
PF Motor cable:
side
Place the relay connector to the hole on the
Base Frame, and route the cable through
the hooks (x3) and the groove (x1).
Power Supply Unit cable:
Route this through the groove of the Base
Frame, and secure it with acetate tape.
Figure 4-207. PF Motor Cable, Power Supply Unit Cable
Revision G
*
CN No. Remarks
CN22 Ferrite core x1
CN501 ---
Relay Connector
Relay Connector
Do not let this get caught.
Hook
Groove
(Continued to the next page.)
202
Confidential