Epson Artisan 810 Service Manual page 199

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
CARD SLOT ASSY
No. FFC/cable name
1 I/F FFC (Infra-red)
2 SUB FFC
3 STG FFC
for the connector positions on the Main Board.
Note * : See Fig. 4-196
Bottom of the
Card Slot Assy
I/F FFC
(Mounted only in Japanese models.)
Front side of the
Card Slot Assy
Fold
STG FFC:
Fold this along the line mark on
the Card Slot Assy, and secure
it with double-sided tape.
Figure 4-200. Card Slot Assy (1)
DISASSEMBLY/ASSEMBLY
CN No. * Remarks
Mounted only in Japanese
CN32
models.
CN7 ---
CN31 Ferrite core x1
SUB FFC
Double-sided tape
Fold line
Line mark
Routing FFC/cables
SUB FFC:
Route this between the ferrite core and Base Frame, and
secure it to the Main Board Unit with double-sided tape
Ferrite core
STG FFC:
Put STG FFC through the ferrite core
and attach it to the Base Frame.
Figure 4-201. Card Slot Assy (2)
Revision G
I/F FFC (Mounted only in
Japanese models.)
Double-sided tape
Fold line
199
Confidential