Epson Artisan 810 Service Manual page 145

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
2. Release the hooks (x4) that secure the IC Guide, and remove the IC Guide
from the Cartridge Box Unit.
IC Guide
Figure 4-79. Removing the IC Guide
3. Disconnect the decompression tube from the socket on the Cartridge Box
Unit. (See Fig. 4-73.)
4. Remove the screws (x7) that secure the Cartridge Box Unit.
Top
Cartridge Box Unit
C.B.P. 3x25 (6±1Kgfcm) C.B.S. 3x4 (4±0.5Kgfcm)
C.B.P. 3x8 (6±1Kgfcm) C.B.P. 3x10 (6±1Kgfcm)
Figure 4-80. Removing the Cartridge Box Unit
DISASSEMBLY/ASSEMBLY
Cartridge Box Unit
Hook
Cartridge Box Unit
Right
Grounding
Plate
C.B.S. 3x6 (8±1Kgfcm)
Disassembly Procedures
To prevent ink leakage, make sure not to separate the Ink Supply
W A R N I N G
Tube Assy and the Cartridge Box Unit by removing the screws (x2)
on the section A shown in
section A even just once will cause ink leakage, therefore, make sure
to replace the Ink Supply IC Holder Assy with a new one.
5. Release the Clamp Tubes (x2). (See
6. Release the Ink Supply Tube Assy and FFC from the FFC Holder, and remove
the Ink Supply IC Holder Assy.
Ink Supply Tube Assy
FFC
Clamp
Tube
Figure 4-81. Removing the Ink Supply Tube Assy
Revision G
Fig. 4-81. Loosening the screws on the
Fig. 4-81.)
FFC Holder
Section A Cartridge Box Unit
Confidential
145