Epson Artisan 810 Service Manual page 203

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
No. FFC/cable name
1 PE Sensor Cable
See for the connector positions on the Main Board.
Note " * " : Fig. 4-196
To Transmission Holder Assy
To Main Board
Figure 4-208. PE Sensor Cable
DISASSEMBLY/ASSEMBLY
*
CN No. Remarks
CN9 Ferrite core x1
PE Sensor cable:
Route this through the dowel and
hook of the Base Frame, and put
the ferrite core in the Base Frame.
Ferrite core
Dowel
Hook
Routing FFC/cables
Revision G
203
Confidential