Scanners For Banding Reduction System (Brs) Adjustment / Paper Feed Amount Profile (Pfp) Correction - Epson Artisan 810 Service Manual

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
9.5.5 Scanners for Banding Reduction System (BRS)
Adjustment / Paper Feed Amount Profile (PFP)
Correction
Overview
The procedure for banding reduction system (BRS) adjustment / paper feed
amount profile (PFP) correction is the same as that for Artisan 810/710/
PX810FW/TX810FW/PX710W/TX710W, but the scanner used for this
adjustment should be a specified one shown in
Adjustment procedure
See "5.2.10 Banding Reduction System (BRS) Adjustment / Paper Feed Amount
Profile (PFP) Correction" (p.224).
Artisan 837/730/PX830FWD/PX730WD/TX730WD
Table 9-8.
Adjustment
Table 9-8. Specified Scanner for BRS/PFP Adjustment
Model Name
Epson Perfection 4990 Photo
Epson Perfection V700/V750 Photo
Epson Stylus Photo RX560/RX580/RX590
Epson Stylus Photo RX585/RX595/RX610
Epson Stylus Photo RX680/RX685/RX690
Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW
Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
Epson Stylus Photo PX650/TX650/TX659
Artisan 810/PX810FW/TX810FW *1*2
Artisan 710/PX710W/TX710W *1*2
Epson Stylus Photo PX660 *1*2
Artisan 635 *1*2
Artisan 835/PX820FWD/TX820FWD *1*2
Artisan 725/PX720WD/TX720WD *1*2
Work Force 635/Stylus Office TX620FWD/BX625FWD/ME
*1*2
OFFICE 960FWD
Work Force 625/Stylus Office BX525WD/Stylus NX625/
TX560WD/SX525WD/ME OFFICE 900WD
*1*2
Artisan 837/PX830FWD
*1*2
Artisan 730/PX730WD/TX730WD
Note *1 : Use the internal scanner.
*2 : Two PFP Base scales are required for PFP adjustment. They should be set on the
origin side and also on right side of the PFP Adjustment Pattern. (See
Revision G
Sensor type
CCD
CCD
*1 CIS
*1 CIS
*1 CIS
*1 CIS
*1 CIS
*1*2 CIS
CIS
CIS
CIS
CIS
CIS
CIS
CIS
CIS
*1*2
CIS
CIS
Confidential
Fig. 5-27.)
326