Epson Artisan 810 Service Manual page 134

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
Parts/Components need to be removed in advance:
ADF Unit (Artisan 810/835/837/PX810FW/TX810FW/PX820FWD/TX820FWD/
PX830FWD only)/Scanner Unit/Upper Left Housing/Paper Guide Top Assy/
Upper Housing
Removal procedure
1. Place the Carriage stopper jig on 80-digit side on the Paper Guide Front Assy.
2. Turn the Spur Gear in the direction of the arrow, and release the Carriage
Lock. (See Fig. 4-54.)
3. Move the Carriage Unit to the 80-digit side, and place it on the Carriage
stopper jig.
Spur Gear
80-digit side
80-digit side
Paper Guide Front Assy
Carriage stopper jig
Figure 4-54. Releasing the Carriage lock and placing the Carriage stopper jig
DISASSEMBLY/ASSEMBLY
Carriage Unit
Carriage Lock is under
the Carriage Unit.
0-digit side
0-digit side
Carriage Lock
Disassembly Procedures
When handling the Printhead, make sure not to touch or
C A U T I O N
damage the nozzle plate surface of the head. (See
Do not damage or contaminate the CR Seal, or touch it with
bare hands either. (See
4. Remove the screws (x4) that secure the Printhead and the Ink Supply Tube
Assy, and detach the Printhead from the Carriage Unit.
3
Printhead
1
Figure 4-55. Removing the Printhead (1)
5. Disconnect the Head FFC (x2) from the Printhead.
Head FFC
Figure 4-56. Removing the Printhead (2)
Revision G
Fig. 4-56.)
Fig. 4-59.)
2
Ink Supply Tube Assy
4
C.B.P. 2x10
C.B.P. 2x12 (Black)
Nozzle Plate
Printhead
Confidential
134