Epson Artisan 810 Service Manual page 162

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
When installing the Scanner Motor Unit, be sure of the following.
Route the Scanner Motor cable through the grooves (x3) of the
Scanner Lower Housing. (See
Align the positioning holes (x3) of the Scanner Motor Unit with
the dowels (x3) of the Scanner Lower Housing. (See
Route the grounding wire as shown below and in
(Artisan 810/835/837/PX810FW/TX810FW/PX820FWD/
TX820FWD/PX830FWD:
PX710W/TX710W/PX720WD/TX720WD/PX730WD/
TX730WD: Fig. 4-117.)
Grounding
Wire
Route the
grounding wire
between the ribs
(x4) and
frame.
Grounding wire
Figure 4-116. Routing the Grounding Wire
(Artisan 810/835/837/PX810FW/TX810FW/PX820FWD/
TX820FWD/PX830FWD)
DISASSEMBLY/ASSEMBLY
Fig. 4-115.)
Fig. 4-115.)
Fig. 4-122.
Fig. 4-116, Artisan 710/725/730/
Artisan 810/835/837/PX810FW/
TX810FW/PX820FWD/
TX820FWD/PX830FWD
Grounding wire
Groove
Rib
Route the grounding wire between
the ribs (x2) and frame.
Disassembly Procedures
Artisan 710/725/730/PX710W/
Grounding
TX710W/PX720WD/TX720WD/
Wire
PX730WD/TX730WD
Route the grounding wire between
the ribs
Figure 4-117. Routing the Grounding Wire
(Artisan 710/725/730/PX710W/TX710W/PX720WD/TX720WD/
PX730WD/TX730WD)
Revision G
(x5) and frame.
Groove Rib
162
Confidential