Quick Text - Siemens ACUSON Cypress Operator's Manual

Scanning
5-18

Quick Text

The Quick Text method of adding text uses the Cypress System keypad to acti-
vate the Text function and to automatically find stored annotations (auto-find).
NOTE The Quick Text function is not available while the Calculations pack-
age is open, or in a Patient or Setup menu or submenu.
NOTE Quick Text annotations cannot be added to a quad screen and Quick
Text annotations are not displayed in the quad-screen format.
Activating/Deactivating the Quick Text Function
To turn on the Quick Text function, follow these steps:
Press the key and highlight Quick Text.
SETUP
1.
To activate the Quick Text function, click to place a checkmark in the box. To
2.
deactivate Quick Text, click to remove the checkmark.
Adding a Quick Text Annotation to the Screen
To add Quick Text labels to images while scanning, follow these steps:
Make sure that Quick Text has been activated using the Setup menu.
1.
To open the Quick Text function, press any alphanumeric key on the Cypress
2.
keypad (or external keyboard).
Type your text until the annotation is displayed and highlighted in the Text
3.
box. To backspace and erase a single letter, use the <
Press < > and use the Trackball to position the annotation.
ENTER
4.
To lock the position and exit Quick Text, press <
5.
Removing Quick Text Annotations
To delete Quick Text annotations, follow these steps:
Remove the Quick Text:
1.
To delete a single annotation: On the screen, highlight the annotation that
you want to remove by pressing the <
tion is on the screen, press the <
tions. To remove the highlighted annotation, press the <
To delete all the annotations: Press and hold the <
the <
BACKSPACE
To exit Quick Text, press <
2.
ACUSON Cypress™ Operator's Manual
TAB
> key to cycle through the annota-
TAB
> key.
>.
ESC
BACKSPACE
>.
ENTER
> key. If more than one annota-
BACKSPACE
> key and then press
ALT
> key.
> key.